Material: Polylactide (PLA)
Color: depending on the variant (e.g. black, white, gray, colors)
Surface: Matt / less glossy

Printing parameters (recommended):
• Printing temperature: 190 – 220°C
• Heated bed: 50 – 60 °C (optional, often not required)
• Print speed: 40 – 70 mm/s
• Fan: 100% after the first shift

Diameter:
• 1.75mm (standard)
Tolerance: ±0.03mm (typical)

Adhesion / Surface:
• Good first coat adhesion to PEI, glass, BuildTak-like panels
• Matte surface look with reduced layer line look

Suitable for:
• FDM / FFF 3D printer with 1.75mm filament guide
• Particularly good for design objects, prototypes, visible parts

Note: Optimal printing parameters may vary slightly depending on printer, nozzle type and environment. For best results, observe the first layer and adjust if necessary.

Coil version:
Filament diameter: 1.75mm
Coil outer diameter: approx. 200mm
Core inner diameter: 52 mm
Coil width: approx. 67 mm

Spool net weight: approx. 1 kg (filament)
Spool gross weight: approx. 1.2 kg (including spool & packaging)

Refill version:
Filament diameter: 1.75mm

Refill net weight: approx. 1 kg

1. BambuLab PLA mat with coil or refill (depending on selection)
2. Protective film/packaging to reduce moisture
3. Optional: Quick guide / material information

Shipping via DHL package (transit time 1-3 days)
14 day return policy

Responsible manufacturer in the EU:

Bambulab GmbH

6291b

60314 Frankfurt

Germany

contact@bambulab.com

Responsible person: